Motorola APX Radio Test Script
============================================
2.4.1

* added the ability to reset the USB driver @ end of test Requires new firmware.
* fixed issue with Tx frequencies on newer radio versions
* Turned off radio transmitter after Ref Osc. Alignment

2.4.0

* changed third softkey to be test and align
* added limits to most of the objects in spec screen
* fixed small GUI isses

2.3.1
--------------------------

* fixed scroll issue of testdata at end of test.
* fixed extra frequency for newer versions of tuning

2.3.0
--------------------------

* If a dual mode radio is only selected for one band. That band will be
  algined/tested for reference oscillator 
* fixed issue with power detector alignment and M30TS Dual 800/VHF radios

2.2.9
--------------------------

* Cable offset functionality changed to now sum an offset and a cable sweep

2.2.8
--------------------------

* Added Ber level spec for each band
* Added UHF R2 frontend alignment
* Added M30TS UHFR2-800 radio
--------------------------
2.2.6

* fixed issue with cableloss widget
--------------------------
2.2.5

* added reference osc test spec to specifications screen
* Mobiles need the PA bias done first will flip it on the fly

--------------------------
2.2.1 -

* Removed some statistics prints.
* Added longer error print for frontend autotune.
* Enabled additional UHF2 frequency support.

--------------------------
2.2.0 -

* Added new freqs in deviation balance and front end for next firmware version.
* Move Ref Osc to be first alignment.
* Ref Osc alignment is less then 50Hz.
* Display real front end frequencies (not the value calculated for offset).
* Added line documenting Internal/External frequency reference state.
* Added UHF2 frequencies for frontend alignment.

--------------------------
2.1.5 -

* Fixed the specification for deviation balance.
* Made it where the bands can be in any order and find the correct radio and
  retrieve the specifications.

--------------------------
2.1.4 -

* Fixed cable loss broken in 2.1.2.

--------------------------
2.1.2 -

* Fixed serial number issue
* Increased delay between radio setup and measurement for Modulation Fidelity test.

--------------------------
2.1.1 -

* Fixed a bug where some recalls where not correct when opening a different
  specification file other than default.
* Improved 'Radio not supported' Message with more information.
* INFO 3 in the specs screen will now accept filter seletions for 'Deviation
  Balance' alignment. LP2 (5kHz LPF) or LP4 (20kHz LPF) default is LP3 (15 kHz
  LPF).
--------------------------
2.1.0 -

* Fix 6000 uhf1 H98QD specifications

--------------------------
Prior Changes -

* added password protect for specs, removed check for version in cable loss.
* added an admin screen to enable users to password protect the spec screen
* added XE models.
* users can now select the bands they want to test for dual band radios.
* added APX6500, APX7000XE, and Consolette, added a sync after USB write.
* firmware version number check in cable loss routine (required for 1.8.0 SW).
* added APX 6000 800-UHF1-VHF.
* includes IP Address config